Description
The SemiTec I set combines an R4 TEC first stage, two TEC2 second stages (one on a long 1.93 m hose and one on a short 61 cm hose) and a 52 mm pressure gauge. The first stage is a balanced diaphragm design with a dry chamber that seals the working diaphragm and prevents freezing in cold water; this protection is also an advantage in heavily silted water. It is made of marine brass with a high-quality frosted chrome finish. The regulator can be used with a standard BCD or a wing, and is also popular on stage tanks for technical diving.
The TEC2 second stage is a downstream demand valve with venturi and breathing resistance adjustment. A heat exchanger reduces the risk of icing in cold water, and a breathing resistance of about 1 J/l makes breathing easier and helps reduce air consumption. TecLine regulators are CE certified and tested to EN 250A, and are also trialled in demanding conditions from icy Polish lakes to caves and tropical waters. Suitable for nitrox up to EAN40 (40% O2).
The set includes:
- R4 TEC first stage
- TEC2 second stage with a 1.93 m black Proflex LP hose
- TEC2 second stage with a 61 cm black Proflex LP hose
- 52 mm pressure gauge with a 60 cm black Proflex HP hose
- 2 stainless steel bolt snaps (88 mm) with D-ring, and bungee
- regulator bag
First stage:
- Diaphragm, balanced
- Additional dry chamber (COLD KIT)
- Ports: 4 LP, 2 HP
- Maximum working pressure: 300 bar
- Maximum flow at 20 MPa: 3823 l/min
- Intermediate pressure: 9.0 bar
- Breathing resistance: 0.983–1.004 J/l
- Material: marine brass
- Nitrox up to 40%
- Complies with EN 250A, CE1463
- Weight: 637 g
TEC2 second stages:
- Pneumatically balanced
- Venturi adjustment
- Breathing resistance adjustment knob
- DFS (direct flow system)
- Body made of materials resistant to large temperature changes
- Stainless steel outer ring
- Teflon coating on metal parts against freezing
- Additional heat exchanger for cold water
- Ergonomic mouthpiece
- Weight: 260 g
