Description
A set for sidemount diving: two R2 TEC first stages, two TEC1 second stages, two pressure gauges and the hoses you need. The first stage is a balanced diaphragm design with a dry chamber that seals the working diaphragm and prevents freezing in cold water; this protection is also an advantage in heavily silted water. It is made of marine brass with a high-quality frosted chrome finish. The rotating turret allows flexible hose routing down each side of a sidemount wing, and a fifth axial LP port is already fitted to the turret.
The TEC1 second stage is a downstream demand valve with venturi and breathing resistance adjustment. A heat exchanger reduces the risk of icing in cold water, and a breathing resistance of about 1 J/l makes breathing easier and helps reduce air consumption. TecLine regulators are CE certified and tested to EN 250, and are also trialled in demanding conditions from icy Polish lakes to caves and tropical waters. After assembly and tuning, every regulator is checked by two independent technicians. Suitable for nitrox up to EAN40 (40% O2).
The set includes:
- 2 R2 TEC first stages
- TEC1 second stage with a 2.1 m black Proflex LP hose
- TEC1 second stage with a 65 cm black Proflex LP hose
- 2 pressure gauges (52 mm) with 20 cm black Proflex HP hoses
- 2 Proflex 20 cm LP hoses for drysuit and BCD inflation (one can be 27 cm on request)
- bungee for holding the second stage around the neck
- 88 mm bolt snap for securing the second-stage hose
- TecLine bag
First stages (2 pcs):
- Diaphragm, balanced
- Additional dry chamber (COLD KIT)
- Ports: 4 LP, 2 HP
- Maximum working pressure: 300 bar
- Maximum flow at 20 MPa: 3823 l/min
- Intermediate pressure: 9.0 bar
- Breathing resistance: 0.983–1.004 J/l
- Material: chrome-plated marine brass
- Nitrox up to 40%
- Complies with EN 250A, CE1463
- Weight: 781 g
Second stages (2 pcs):
- Balanced
- Venturi and breathing resistance adjustment
- Maximum flow at 20 MPa: 850 l/min
- Breathing resistance: 0.983–1.004 J/l
- Material: polyamide
- Wide, comfortable and flexible exhaust
- Heat exchanger against freezing in cold water
- Nitrox up to 40%
- Meet EN 250A, CE1463
- Weight: 250 g
